puremusicgroup - Stogi Ref. 313 (Powered by CubeCart)

Welcome Guest
[Login | Register]

Shop by Category

Shop by Manufacturer

General Information

Stogi Ref. 313

Product Information

Stogi Reference 313 Tonearm

A 12" version of Stogi Reference the 313 tonearm is a very rigid medium mass tonearm with precision ball bearings which, while withstanding very heavy loads, displays extremely low starting and running friction and noise levels. The main frame and all other parts are machined from solid aluminium blocks. Some parts are anodized and some are not, in order to help control tonearm resonance. The head-shell provides a stable cartridge mounting, while the internally damped tube connects this to the massive bearing parts where any vibration or noise is dispersed.

Similar in construction to the standard Stogi, this tonearm incorporates a conical tube and the vertical bearings have a highly damped brass housing.

A decoupled brass counterweight controls balance and adjusts tracking force, while damping vibration in the tube. The massive arm base serves to clamp the tonearm rigidly to the armboard. All bearings are pre-loaded and glued into position which, while damping vibrations in them, also provides long lasting, zero play, low friction bearings. VTA adjustment is made by raising or lowering the tonearm in the arm base. An optional vernier VTA ring set is available to allow precise and repeatable VTA adjustments.

The conical tube is internally damped and divided into two parts which, while further aiding damping, also allows for easy azimuth adjustment. A special mechanism, using a simple Allen key, allows the tube to be rotated back and forth in fine increments with no air gap. This mechanism is submerged in silicone grease for further damping. A marker line clearly shows the azimuth position and facilitates use, while allowing for repeated adjustments.

Wires are in one length from cartridge pins to RCA connectors. High quality wires are incorporated into our own cable. It is also possible to use the tonearm in a balanced configuration.

Standard cable length is 1.5m, Cardas Copper wire with Eichmann Copper Bullet plugs. Optional is "Crystal Cable" Silver Wire with Eichmann Silver Bullet plugs. Call for price.

Technical Data:
effective mass 12.0 gr
effective length 313 mm
pivot to spindle distance 300 mm
offset angle 17 degrees
friction with zero play less than 10mg
height adjustment yes
bias adjustment   yes
fine azimuth adjustment   yes
arm mount:Linn compatible
mass 850 gr

Cartridge Compatibility: This tonearm is a medium mass tonearm and suits most phono cartridges. To find out if it is optimal for your cartridge you need to calculate the resonant frequency of the tonearm and cartridge combined. Tonearm Resonant Frequency Calculator click here.

Pricing: Kuzma qualifies for Parity Pricing. In Europe Stogi Reference 313 is priced at EUR2,805 and we charge the same price in Australia converted to Australian Dollars at the current rate of exchange when you place your order. This means you pay the Euro price for an Australian delivered unit inclusive of shipping, taxes and local warranty. Below is an indicative price in Australian Dollars.

Price: $4150.00 (Inc. GST)

Tell a Friend

Product Code: KUZ009

Quantity: Add to Basket

Shopping Basket

Your basket is empty.

0Items in cart:
$0.00Total (Inc. GST):

View Basket

Currency

(Inc. GST)

Sale Items

Melody M300BP Amplifier
Save $1300.00
Minimax Amplifier
Save $760.00
ADAM A5
Save $500.00
Melody I88R Amplifier
Save $400.00
Melody SP9R Amplifier
Save $300.00

puremusicforum

The puremusicgroup forum is now live!

Enter Forum